DSL Directions - Windows ME/2000 |
A Router is needed if you are connecting more than one computer to the Internet at a time. Although there are several brands of
Wired and Wireless routers, they should all be compatible with your YHTI DSL service.
|
- Click on START, SETTINGS then Control Panel.
- Double click to open the Network icon.
- At the bottom of the "components" list, double click to open "TCP/IP -> 10/100 Ethernet" properties. The actual name, "10/100 Ethernet", on your computer may vary. You will be opening the TCP/IP that is NOT labeled "TCP/IP Dial-Up Adapter".
- At the IP Address tab select "Obtain an IP address automatically".
- Click on the Gateway tab.
- If you have any numbers in the "Installed Gateway" box, highlight them and click Remove.
- Click on the DNS Configuration tab and select Disable DNS.
- Click OK at the "TCP/IP Properties" window and then OK at the "Network" window.
- Hit OK or Yes at the prompt asking you to restart your computer.
- Turn the DSL modem off and back on.
|
|